MAGNUM PUMPS CENTRIGUGAL AND VORTEX

Centrifugal Pumps

Superior performance and reliability with "Magnachrome", a new high strength proprietary material for critical components.

Exceptional hardness (650 Brinnel) for wet end components assures longer life and lower operational costs.

Actual tests show wear resistance 9 times that of C.I.

Full Range of pumps with flows to 7500 GPM and heads to 550 feet. Magnum Pumps Centrifugal and Vortex

Engineered for the toughest applications in all types of abrasive and corrosive slurry services
Solid stainless steel shaft with L3/D4 ratio of 29 (1:1)
Power end with solid cast base for maximum rigidity
High chrome materials to 650 Brinnel hardness
Available in sizes:
- Centrifugal - 3 x 2 - 13 to 10 x 8 - 14; flows to 3,200 gpm (725 m3/hr)
- Vortex - 3", 4", 6"; flows to 2,200 gpm (500 m3/hr)
Horizontal, v-belt drive and vertical configurations (see brochures 1301-005, 1301-004)

VORTEX

Vortex pump puts System One® strength and reliability in the service of handling entrained solids without clogging. Available in the LD17 and IPP Metric configurations. Capacities to 1,500 gpm (340 m3/hr).

Frame A and LD17 pump with vortex casing and impeller, designed specifically for difficult pumping situations:
- Sludges and slurries with large solids
- Pumped material with entrained air
- Pumped fluids with stringy or fibrous materials
- Minimum product shearing
ASME/ANSI & IPP Metric flanges available
Especially suited for:
- Waste treatment
- Food and chemical processing
- Pulp and paper
- Agriculture

Major applications for "Magnachrome" material include:

Municipal waste treatment-sewage (vortex)
Barite, ferric oxide and mineral oil base drilling muds
Glass fibres
Pulp and paper
Sugar processing
Ash or coal conveyers
Cement
Mine de-watering
Lime, gypsum, calcium carbonate slurries
Kaolin clay
Crystalline forms

EXCLUSIVE FEATURES

Designed around the seal and bearings where 90% of failures occur
Designed to maximize system reliability - stronger, more vibration-resistant pump
Heavy-duty, solid, low deflection shaft prevents common vibration damage and greater stability at the seal area to improve seal life
Heavy-duty bearings offer greater load capacity and extend bearing life
Patented System One® Labyrinth Seals provide non-wearing lifetime protection for radial and thrust bearings

HEAVY-DUTY CONTRUCTION

Heavy-duty shaft, bearings, seals and housing design means this pump is built for reliability in the most extreme environments
Offers the widest window of operation off the BEP of any conventional centrifugal pump

Mid-States Engineering & Sales, Inc.
5001 Chase Ave., Downers Grove, IL 60515
Hours: 8:00am - 4:30pm CT
Tel: (630) 969-2958 Fax: (630) 969-4272
Copyright © 2009. All rights reserved.
www.mid-states-sales.com

Power Generation Filtration Solutions | Filtration | Pumps | Flow Indicators
Gauges-Thermometers | Environmental | Liquid Handling | Meters

New Products | About Mid-State | Contact Us | Home

Secondary Containment | Filters | Flow Indicators | Gauges & Thermometers | Indicators

Other Resources

MAGNUM PUMPS CENTRIGUGAL AND VORTEX

Centrifugal Pumps

Internet Marketing - Chicago Web Design by PrairieWeb